Details
Details
Wireless Presenter with Laser Pointer
USER GUIDE
Introduction
Congratulations on your purchase of the Targus wireless presenter with laser pointer. This combination presenter laser pointer features four control buttons that emulate the command keys in PowerPoint need for software drivers and the long range 2.4 GHz technology
allows for effective presentations up to 33 feet (10 m).
Package Contents
• Wireless presenter with laser pointer
• Ulitra-slim USB receiver
• 1 x AAA battery
• User guide
System Requirements
Hardware
• USB interface
Operating System
• Microsoft Windows 2000
• Microsoft Windows XP
• Microsoft Windows Vista
Setting Up Your Wireless Presenter
Installing The Battery
If the presenter is on, slide the on/off switch located on the side of the presenter to the "off" position.
Insert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment
Slide the battery cover back into position until it "clicks" firmly into place.
Turn on the presenter.
Connecting The Receiver
Plug the USB receiver into an open USB port on your computer.
Your computer's operating system will identify the receiver and install the default driver.
Synchronizing Your Wireless Presenter
The receiver and presenter should synch up automatically.
However, in some cases they may not synchronize properly due to environmental interference or other causes. If this is the case, you must re-establish the link.
Using your wireless presenter
Safety Measures
• To avoid possible eye damage, never point the presenter's
laser at people, especially their faces, or look directly into the
presenter's laser beam.
• Avoid pointing the presenter's laser beam at a mirror or other
highly-reflective surface.
• Keep the presenter away from young children.
• Never view the presenter's laser beam using telescopic devices,
such as a microscope or binoculars.
• Any attempt to disassemble, adjust or repair the presenter may
result in exposure to laser light or other safety hazards.
Troubleshooting
What do I do if the response time of the presenter is slow or
it intermittently stops working?
• Make sure that the presenter is within 33 feet (10 m) of its
receiver.
• Increase the distance between the presenter's receiver and the
base units of other wireless devices.
• Turn off any wireless devices and their base units that are near
the presenter's receiver.
• Replace the battery.
• Synchronize the receiver and presenter. See "Synchronizing
Your Wireless Presenter"
Product Specification
Transmitter
RF | 2.4GHz-2.483GHz |
Battrey Type | AAA Battrey |
Effective RF Communication Range |
10 meters Max |
RF Output Power | 1mW Max |
Power Consumption | 30mA Max |
Reciver
RF | 2.400GHz-2.483GHz |
Interface | USB1.2/2.0 |
Power | USB Bus Power 5V DC |